Autel tutorial: how to register and update Autel MaxiIM KM100 software and VCI.
Part I: Register KM100
Turn on KM100
Go to Settings>>System Settings>>WLAN
Connect Autel KM100 to Wi-Fi.
Back to Homepage, select “Update”.
KM100 says the product has not been registered.
Part II: Update KM100
After registration, go to Home page-> Update
Download System Program
Back to “Update” again, download “KeytoolDiag”.
Then download all immo programs required.
Part III: Update PLC200 VCI Firmware
Back to “Settings”, and select “VCI manager”.
Connect VCI to device by USB cable.
Switch to “Firmware upgrade” and update firmware if there is one available.