Yanhua Mini ACDP released new module 26 Ford 6-speed dual-clutch gearbox clone for Ford Focus, Ecosport, Fiesta, Aspire, Figo etc. The special interface board connection method replaces the traditional wire plugging method so that wires are NOT plugged to the wrong direction and place. This special interface board connection method is simple and efficient, plug and play, safe and reliable.
How to Clone Ford DPS6 Gearbox TCU with Yanhua ACDP Module 26?
ACDP app will show you connection diagram
Follow diagram to connect ACDP, Module 26 interface board and gearbox
Run ACDP App, select Ford- Gearbox Clone- DPS6
Step 1: Check connection
connect ACDP with the gearbox
Detect TCU serial and hardware number and system information
Auto backup information
Select Step 2: Read and Write Data-> Full Backup Data
Read and save chip data
Back to Step 3: Disconnect
Disconnect TCU with ACDP
Connect the new DPS6 gearbox TCU and prepare to write the original data
Go to step 1 and check Connection as well
Go to Step 2: Read/Write data-> Full Write Data
Select chip data you saved in the previous step
Ready to write chip data, don’t cut the power nor pull out the device during the programming
Write chip data succeed
Save new data
Again perform Step 3 Disconnect
Ford DPS6 gearbox TCU cloning with Yanhua ACDP is completed.
