Question: I have VW GOLF 7 2017 MQB JCI (Johnson Controls) keyless all keys lost can VVDI 2 do or not ?
Answer: All keys lost not possible with VVDI2. But okay for add a spare key.
VAG OBD helper + VVDI2/Lonsdor K518ISE with IMMO data , you safe.
Even if you lost battery / connection etc .
once you load immo data to Key Learn function you can learn key again.
Model example: VW Passat 2017 MQB Keyless system
Keyless key programming
Prepare dealer key
Remote key learning
One original keyless GO key
Step 1. Use OBD helper to read the MQB – NEC35XX part immo data
The original remote key can start the car, press the ” Engine start /stop” to turn on ignition on.
Install VAG OBD Helper V1.0.0 software on the computer, connect OBD Helper to vehicle
Click on “Read car information” to have info of manufacture, VIN, Immo type, power, key count, KeyID etc.
Connecting to server…
MQB -NEC35XX part immo data success saved…
Step 2: Prepare dealer key first, then learn key to car
Unplug VAG OBD Helper from vehicle, then connect VVDI2 cable.
Open VVDI2 software, go to VW /Audi /Skoda Online Key Learn -> Special Function
Click on “Diag” and have message Johnson Controls will be supported in future.
Click on “Key Learn” -> “MQB platform instrument immobilizer” -“Instrument with NEC35xx (Continental /VDO).
Click on “Immo data prepare key” to load immo data.
Choose car manufacture “VW”->”Prepare normal dealer key”, then “Next”.
Click on “Yes” to continue prepare normal dealer key.
Put the original key into the coil of VVDI2 machine.
Select “add key”.
Do you want to save the synchronize data? you can prepare a dealer key with synchronize data while lost all key.
Please input the new key (Xhorse key XSMQB1EN 3 Buttons)into device programmer.
Prepare dealer key success, please learn the new dealer key to car.
Click on “Add key”.
You should backup EEPROM and Immo data before learn key.
Input 2 learning key number.
Click on “Load immo data”.
Click on “Next”
Put the dealer key nearby car ignition switch.
Click on “Yes” to agree car has keyless.
Click on “Yes” to learn keyless GO key.
Learned key number /Total key number:1/2.
Please put 2 key nearby car ignition switch and the press ok.
All keys successfully learned.
Test remote and new key
Both key works.
Volkswagen Passat 2017 MQB Keyless Johnson Controls
Remote key programming
CS Reading online
Prepare dealer key
An original key
VAG OBD helper (with token & Network Connection)
Lonsdor K518ISE key programmer
Step 1: Read IMMO data
Turn on ignition with original MQB key
Connect OBD Helper cable with vehicle
Step 2: Make dealer key
Connect K518ise with vehicle
Go to Immobilizer->VW->IMMO4->Auto identify IMMO
Perform the following operations according to the key type:
Smart key: Turns the ignition off and then on
IMMO key: Switch off the ignition with the key that allows the vehicle to be started
Lonsdor shows immo function not supported currently
This function can import data to learn a programmed dealer key or OEM key (copy original car ID),
the key will be made and use it to learn more keys
Select immo data bin file that we have pasted to K518 customfile
Reads Immo type, CS and PIN
Step 3: Learn key
Select Key Programming (OBD)
Select IMMO data from k518 customefile
Confirm CS and PIN
Turn the ignition on with the original car key.
For a smart key, turn ignition off and on, open and close the car door, then click ok
Attach the original MQB key to the induction coil
Both key works.