FAQs + Images: How to use Multi-Diag Access 2018.03 J2534 Passthru interface

Good to know: Actia Multi Diag Access Passthru is updated to version 2018.03, the latest software with china clone:

http://www.obdii365.com/wholesale/v-2013-latest-version-multi-diag-access-j-2534.html

 

Actia Multi Diag 2018 questions and answers:

 

  • Hello, I have an actia a couple of years ago and I have it installed on a desktop computer, there would be a problem in installing the update. my scanner is french

Hello, there is no problem in installing the update on the computer, you would have to pass the serial number of the computer to see if it is compatible or you have to reprogram the scanner.

 

  • What with cm interface works?

It works with the actia multi-diag interface

 

  • Hello you m install the program I have the interface of Peugeot citroen is compatible ??

Hello, it is not compatible with the Peugeot scanner. regards

 

  • Tell me how we do to perform the update. You send me the program and install it with Teamviewer?

The multi-diag sw cannot be updated yourself.

You’d better get a new vci with updated firmware for the new software.

 

  • My problem is that it is not a notebook. It is a desktop PC installed in a mobile cabinet …

We can help install the program remotely, if it does not work, just bring the scanner to change the serial number.

 

  • I would like to know what would be the steps to update Multidiag. I have it installed on a PC running Windows XP. I have the pregrama and the original VCI (Series N ° 120201). I’m from Rosario.

Hello, the multi-diag sw cannot be updated yourself.

You’d better get a new vci with updated firmware for the new software.

 

  • It serves for the diag box lexia. 

Hello, it only works for multidiag interfaces.

 

  • Good day, we are going to make the purchase of the update and we communicate via telephone. Thanks greetings

Hello good day, please remember please choose the option “agree delivery with the buyer”. If you have any doubt consult me ​​before.

 

  • It seems to me that it is better to send the interface first to buy time, give me the address and transport where I send the interface and where I sent the payment (along with the interface or some kind of deposit). Greetings. Oscar

Oscar, this is our website: http://www.obdii365.com/

The link to access multi-diag interface: (NOT require keygen)

I-2018: http://www.obdii365.com/wholesale/v-2013-latest-version-multi-diag-access-j-2534.html

I-2016: http://www.obdii365.com/wholesale/i-20161-multi-diag-access-j2534.html

I-2015. http://www.obdii365.com/wholesale/new-high-quality-multi-di@g-access-j2534-pass-thru-obd2-device.html

I-2014: http://www.obdii365.com/wholesale/multi-dig-access-j2534-pass-thru-obd2-device.html

I-2013: http://www.obdii365.com/wholesale/multi-diag-access-j2534-pass-thru-obd2-device.html

I-2011: http://www.obdii365.com/wholesale/new-high-quality-multi-diag-access-j2534-pass-thru-obd2-device.html

 

  • Send the scanner refers to the interface alone or also the notebook where it is installed?

To the interface alone to be able to change the serial number. The installation can be done remotely.

 

  • Is the installer software with update included? I have the original Multidiag program. The original VCI of Actia with N ° Series 120201. I have it installed in a notebook with W98 and I would like to install it in another with W7. My fear is to modify the VCI and then not work with the new software and not with the original.

Hello good day, to work with version 2018 it is necessary to change the serial number, we guarantee that it will work perfect with version 2018. Any other question we are at your disposal.

 

  • Is the installer software with update included? I have the original VCI of Actia with N ° Series 120201. I have it installed in a notebook with W98 and I would like to install it in another with W7.

Hello good afternoon, come back to check on Monday that I confirm with the technician if that serial number works.

 

  • How much do you do that job with original Multidiag 2018

$ 2000

 

  • I pass the number of the interface sn: 076957 02/13 you can tell me if it works without reproming

This serial number is not compatible with version 2018, you should send us the interface to change the serial number.

 

  • I have a clone interface used for this program

Hello good day, if it works with clone interfaces, depending on the serial number it may be that you need to reprogram the interface.

 

  • Has Fiat Bull, Palio 2018, Corsica and Renault Kwid?

Hello, to see all the models included in the program you can see it from the actia website.

 

  • Hello! Do you have models 2018?

Hello, if you have models 2018.

 

  • Hello, I have díagbox, this program that you sell is compatible for the interface that I have?Thank you

Hello, it is only compatible with the own scanner of actia.

 

  • With what interface it works … it has to be actia … I have an elm 327 can be compatible thanks

Hello good afternoon, it is not compatible, it only works with interfaces of the actia brand.

 

  • This soft is for scanner delphi?

Hello, it’s not good for the delphi.

 

 

2018 Actia Multi Diag images:

actia-multi-diag-i-2018-images-1

actia-multi-diag-i-2018-images-2

actia-multi-diag-i-2018-images-3

actia-multi-diag-i-2018-images-4

actia-multi-diag-i-2018-images-5

actia-multi-diag-i-2018-images-6

actia-multi-diag-i-2018-images-7

source: http://www.obdii365.com/wholesale/v-2013-latest-version-multi-diag-access-j-2534.html

OBDII365