Volvo 2000-2010 OBD Odometer Correction: Carprog Works!

Possible to use Carprog for Volvo dashboard emulator? Change km…

 

Yes. This is Carprog volvo S60 dashboard testing

carprog-volvo-1

carprog-volvo-2

carprog-volvo-3

carprog-volvo-4

carprog-volvo-5

carprog-volvo-6

carprog-volvo-7

carprog-volvo-8

carprog-volvo-9

carprog-volvo-10

carprog-volvo-11

Carprog and Volvo S60 details can be found at

http://blog.obdii365.com/2018/03/15/carprog-clone-and-volvo-s60-dashboard/

Thanks to obdii365.com

 

You need:

CarProg Volvo odometer correction software

Additional cables are required – A1+ (A1 PLUS) ODB2 adapter and A21 VOLVO CAN cable.  These cables are included in the full package:

http://www.obdii365.com/wholesale/carprog-full.html

How to use Carprog for Volvo dashboard:

With this software you can Read/Write dashboard EEPROM memory by OBDII CAN diagnostic, Read/Write dashboard processor flash by OBDII CAN diagnostic, repair odometer, reset oil service and erase error memory.

Works with these cars:

  • Volvo S80 1999-2000 with HC08 1H56A micro;
  • Volvo S60, V70, S80 2000-2001 with HC912 4F73K micro;
  • Volvo S60, V70, S80, XC70, XC90 2001-2004 with HC912 3K91D micro;

Volvo S40, V40, S50, S60, V70, S80 2004-2007 with 9S12 0L85D micro (now only by dashboard connector); Use cable C1 and A1+ (no need VOLVO OBD adapter).

diy-carprog-c1-Volvo-0L85D-wiring-1

diy-carprog-c1-Volvo-0L85D-wiring-2

diy-carprog-c1-Volvo-0L85D-wiring-3

  • Volvo V50 2007+ with 9S12 3L16Y micro;
  • Volvo S60, V70, XC60, XC70, XC90 2007+ with 9S12 1K78X micro;

HINT:

after first programming phase start car engine twice and only after push “OK” on CarProg (CarProg ask just switch ignition ON-OFF)

carprog-volvo-test-1

carprog-volvo-test-2

carprog-volvo-test-3

 

Tutorial: How to build a C1 adapter for Volvo km change:

 

WARNING:  

If you use C1 together with A1MULTI – please cut OBDII male connector pins 3 and 11 like in picture:


A1MULTI adapter has 3 different CAN lines and this modification will disconnect CAN3-11 from CAN6-14 (look C1 schematic).

Carpog-C1-adapter-modification-1

Using this additional cable you can test car electronic on the table:

  • Volvo dashboard repairing on the table;
  • Airbag testing and “crash data erase” on-table;
  • Opel, VAG ECU programming on-table;

Carpog-C1-adapter-modification-2

Carpog-C1-adapter-modification-3

Carpog-C1-adapter-modification-4

Carpog-C1-adapter-modification-5

 

Thanks to codecard.eu.

OBDII365