SAE J2534 device can be used as Nissan Consult 3 Plus?

This is for anyone wants to know if Bosch Proflasher j2534 can be used as a VI with Consult 3 Plus.

 

Here you go…

 

The CONSULT III plus (C-III Plus) R2R diagnostic software can be installed on any off-the-shelf personal computer that meets CONSULT software operating specifications and can be used with a compliant SAE J2534 device.

nissan-consult-3-plus-r2r

It’s from Nissantechinfo.com
Not found the free version yet.

We do not take any responsibility if cause any damage.

 

As wrote on official PDF documentation, new device could work with Nissan Consult 3 plus R2R.

 

Anyway it’s only for 2018 and newer model.

 

System Requirements:
Operating System: Microsoft Windows 7
Click here for Minimum System Requirements
J2534-1 Device: Drew Technologies – CarDAQ-Plus 2

 

Functionality:
Software does not support Immobilizer diagnosis. Immobilizer diagnosis can be completed by authorized and registered Security Professionals using CONSULT-III plus software.
Software does not support ECU reprogramming or blank programming function. NERS software will continue to support this function on any off-the-shelf personal computer that meets operating specifications.
For a complete list of supported software functions view the C-III plus R2R Operation Manual

 

Vehicle coverage:
CONSULT-III plus R2R software supports all Nissan and Infiniti 2018 model years or newer vehicles with the exception of GTR. GTR software for any off-the-shelf personal computer can be purchased from the GTR tab above.

Conclusion:

It only covers 2018 + vehicle and last time i checked there was about 3-5 in the list
also it is officially only supported by 1 J2534-2 Interface (cardaq +) so its not worth the website its listed on .
there is only one useful feature about this software and that’s the VCI Manger it comes with.

 

For a better Nissan vehicle coverage at a decent price, you can get a working Nissan Consult 3 Plus china clone of good quality.

nissan-consult-3-plus-pcb-1

nissan-consult-3-plus-pcb-2

Source: http://www.obdii365.com/wholesale/nissan-consult-3-plus-nissan-consult-3-nissan-diagnostic-tool.html

nissan-consult-3-plus-review

The Consult 3+ is confirmed to work with new and old Nissan, from the year 1998 to 2018, using the latest Nissan software version 75.

 

Nissan, Infiniti, GTR: diagnostic OK, Immo & smart key OK

Nissan GRT: diagnostic OK, Immo OK

Electromobiles car: diagnostic OK, Immo OK (Require additonal Nissan consult 3 plus security card, Otherwise button “Immobilizer key” will be gray color and is unavailable to use.)

OBDII365