Free INPA 5.02 and Ediabas 6.4.7 Win7 64-bit Installation

Many people are seeking INPA/Ediabas Windows 7 64-bit installation guide. Here you can download free INPA 5.02 and Ediabas 6.4.7 and check the installation guide step-by-step.

 

Free Download INPA 5.02 and Ediabas 6.4.7 Software

 

Installation:
Step 1: Install software setup

Open the DVD and go to the Program installation folder. Rightclick on setup.exe and select
Properties. And go to the tab Compatibility. Choose Run this program as, Windows XP
service pack 3. Choose OK and run setup.exe

inpa-ediabas-on-win7-64-bit-1

Step 2: Install BMW Standard Tools

Select English language and follow screen prompts

Choose  Available Hardware Interface as STD:OBD when come across Hardware Interface Setting screen

inpa-ediabas-on-win7-64-bit-2

Set OBD COM port to COM1 if you are using a USB to serial adapter tick
the box in next screen

inpa-ediabas-on-win7-64-bit-3

Windows will ask you for previous installed folder of Ediabas and INPA, choose the
folders. This should be C:\Ediabas and C:\INPA. Proceed the install and when asked to reboot
computer, reboot your computer!

 

Step 3: Update Ediabas and INPA

Go to the software DVD and open folder Referenz then Install and run Instprog.exe.

inpa-ediabas-on-win7-64-bit-4

On the screen prompted choose OK then choose language and Continue
Then choose C:\ as destination drive, this should not be changed!

inpa-ediabas-on-win7-64-bit-5

The choose BMW Group Rectification Programs UK for Europe, USA for USA

inpa-ediabas-on-win7-64-bit-6

Then choose update boxes next to Ediabas and INPA

inpa-ediabas-on-win7-64-bit-7

Continue with the installation and press End when finished. A folder will open, close this folder.

 

Step 4: OBDSetup.exe

Browse C:\Ediabas\Hardware\OBD and run obdsetup.exe, a screen similar like this should
appear. If not you need to add some register values that are also in the downloaded file!

inpa-ediabas-on-win7-64-bit-8

Run OBDsetup registervalues Windows 7, when prompted to be sure this values should be added press Yes.

inpa-ediabas-on-win7-64-bit-9

Then run OBDSetup again to check if everything is OK now!

 

Step 5: Ediabas.ini
When you want to use INPA with DIS\GT1 you have to copy the ediabas.ini file from the
downloaded file to C:\Ediabas\Bin.
The settings in this file are:

LoadWin32 = 1
Interface =STD:OBD

;—————————————————————————–
; RemoteHost
; Description : server address/name
; Default = diaghead
RemoteHost = 192.168.68.1
;—————————————————————————–
; Port
; Description : IP communication port
; Value : 1000 < port < 30000
; Default =
Port = 6801

Done!

OBDII365