The newest XPROG-M programmer v5.6.0 with USB dongle has been tested successfully now, and first released at obdii365.com. Here is the Xprog v5.6 software installation instruction on Windows 7 32 bit.
Software version: V5.6.0
Operating System: Windows XP/ Windows 7 32-bit
Note:
XPROG v5.6 software can not be used with older Xprog-m firmware. It only can work with XPROG v5.6 ecu programmer. No anti-virus program. No software update.
Preparation:
Open DVD disk (E:)
Copy XPROG 5.6.0 zip file to Desktop
Extract XPROG 5.6.0 zip file on Desktop and open the folder
Part 1 – Install Adobe Reader XI
Open XP 5.6.0 folder-> AdbeRdr11000_zh_CN application
Preparation steup…
Click Next
Auto install, click Install
Installing Adobe Reader XI…
Adobe Reader XI installation success. Click Finish
Part 2 – Install Registry Editor
Open XP 5.6.0 folder-> Registry Editor2
Yes to continue
Keys and values have been successfully added to the registry. Click OK
Part 3 – Install driver software and computer management setup
Copy XPROGBOX 5.60English from E:/XP 5.6.0 folder to local disk C:
Prompt: installing device driver software…(in the button menu column)
Click the prompt info and click Close
Prompt: Device driver software was not successfully installed
Click the prompt info and click Close
Open Computer Management
Select Device Manager-> XPROG-BOX
Right click for Update Driver Software…
Browse my computer for driver software manually
Browse Desktop/ xp 5.6.0/ XPROG-BOX drive/ WINDOW XP
Then OK.. Next
Install this driver software anyway
Windows has succesfully updated your device software. Click Close
Back to Computer Management
Select Device Manager-> Other Device-> USB Serial Port
Right click for Update Driver Software…
Browse my computer for driver software manually
Browse Desktop/ xp 5.6.0/ XPROG-BOX drive/ WINDOW XP
Then OK.. Next
Install this driver software anyway
Windows has successfully updated your device software for XPROG-BOX programmer (COM4). Click Close
Then you will see Ports (COM & LPT)-> XPROG-box programmer (COM4)
Select Device Manager-> Human Interface Device-> USB Input Device
Part 4 – Read and Write AT93C66 with XPROG V5.60
Open local disk C:-> XPROG-BOX 5.60English-> XprogDesktop application
Accept the agreement
Click Device
Select Serial EEPROM/ Atmel/ AT93C66
Click New, then Read
Click Write to write file to the device
Close NONAME2 and NOT save changes to NONAME2
Again, click New, then Read
Close NONAME2 and NOT save changes to NONAME2
Again, click New, then Read
Close NONAME2 and NOT save changes to NONAME2
Send XprogDesktop application to Desktop to use for convenience