Question: How to perform mileage correction on bmw (i.e E90) with autohox ii? Getting function under Test. Need the cluster, cas, and key to read correctly. Any advice will be appreciated. For CAS system You can do the job with… Continue Reading
AutoHex II HW4 is very good at BMW FEM and BDC diagnosis, coding, programming. BMW FEM (FRONT ELECTRONIC MODULE) and BMW BDC (BODY DOMAIN CONTROLLER) are the supersedes of CAS units. It is integrated with functions of CAS, FRM, JBE and ZGW.… Continue Reading
Here is all about BMW ISN (DME DDE EWS CAS). ISN is not a software, but rather it is the immobilizer key code that the EWS or CAS module (the immobilizer security module). Newer cars’ ISNs use a starting code… Continue Reading
There are some people talking about BMW AutoHex II and BMW-Explorer But actually, this is unfair comparison. Look at more details below: As we saw in the previous comments people are talking only on the ISN function or the… Continue Reading
How-to: replace FEM/BDC with used one in F series when have communications with original. Solution 1: Device used: AutoHex II for BMW •Unlock original FEM/BDC using working key in Autohex II •Read and save ISN from the original FEM/BDC using… Continue Reading
BMW F series X5 DME MEVD17 adaptation success using Autohex II for BMW. The original DME is water damaged. This function is used to Read/Write DME ISN on bench without opening the ECU. Autohex II allows us to clone a… Continue Reading
