Autel IM508/IM608 Read BMW MG1 MD1 Locked ECUs via G-box3

Tutorial: How to read BMW Bosch MG1/MD1 locked B48/B58 DME ECUs with Autel MaxiIM IM508S/IM608 II.

ECU example: BMW B48 MG1CS201 locked TC298TP

autel-gbox3-read-bmw-mg1-locked-ecu-1

Tools required:

Autel IM608 II/IM508S+ XP400 Pro

Autel G-box3 with DB15 cable

12V power supply

 

NOTE: To read ISN from BMW DMEs, you must use Gbox3. G-box2 is not working.

autel-gbox3-read-bmw-mg1-locked-ecu-2

Procedure:

Go to System Selection- Engine- Direct Connection.

Input Bosch part number (i.e 0 261 S10 3GK) to detect ECU type: MG1CS201_LOCK TC298TP.

Autel will show you the wiring diagram.

Check if the diagram is the same as your ECU.

autel-gbox3-read-bmw-mg1-locked-ecu-4

autel-gbox3-read-bmw-mg1-locked-ecu-5

Connect Gbox3 DB15 cable wires with DME ECU. Connect 5 wires, GND, CAN-L, CAN-H, 12V.

Then connect DB15 cable with g-box3.

Connect 12V power supply to the G-box.

autel-gbox3-read-bmw-mg1-locked-ecu-6

autel-gbox3-read-bmw-mg1-locked-ecu-7

autel-gbox3-read-bmw-mg1-locked-ecu-8

Then read EEPROM and Flash.

EEPROM data contains the ISN code.

If need to read ISN code, upload eeprom data to retrieve pin code.

autel-gbox3-read-bmw-mg1-locked-ecu-9

If need a full data backup, read eeprom and Flash separately. Then write data.

OBDII365