Possible to program newer 2023 Nissan Serena smart key with Autel IM508/IM608?
Any risk if we try it with Nissan 40pin BCM cable?
Here is the clue.
Sometimes it works; sometimes it does not. If Autel fails, try Lonsdor. If all fail, try the key cloning function.
User’s working experience:
“Did one with Autel IM608 last week. After I plugged 40 pin cable, I lost communication. So I read basic data (key positions and ID’s) throught basic OBD connection and made key clone with Autel (but wrote lost ID in new key). Both keys worked perfect; no remote sync issue will appear cause there are 2 different keys ID’s.
Autel NXP copy is the the same as NXP killer.
NXP killer makes only direct clone of key, you cannot change ID. Its simple copy-paste function. Autel hacked this type of NXP chip too with changing ID’s feature. So with NXP killer you could have sync issues, with autel you won’t (if you choose lost keys ID to new one).
Autel MaxiIM IM508/IM608 series now supports Nissan NCF29Ax NXP smart key cloning function.
Supported models:
2019- Ariya, Pathfinder, X-Trail, Qashqai, Sylphy, E-POWER, HB18, KICKS, MICRA, Note e-POWER, NP300 FRONTIER, NAVARA, NP300 NAVARA, PRIMASTAR, R53, ROGUE, Serena e-POWER, Sylphy e-POWER, SYLPHY Zero Emission, TOWNSTAR.
2121- RH850 series Infiniti QX60, QX60 hybrid
Supports copying AUTEL ikey universal and original keys. AUYEL smart keys need to be generated in advance.
Remove the original car key.
Connect the XP400 Pro programmer, key board, and APB131 adapter.
If you cannot find the wiring diagram for the exact key board type, refer to the key chip wiring diagram based on the chip type to perform the reading.
Read and save key data.
Then write a new Ikey or original key.
