What tool to program 2025/2024 Infinity QX60 (aka 2025/2024 Nissan Pathfinder) smart proximity key?
Here is the clue.
also applied to models like Sentra (B18) 2020+, Rogue T33 2020+, Xtrail T33 2020+, Pathfinder R53 2020+ and similar Infiniti models.
Autel failed to add key even with BCM40 pin cable. It still asks for pin code.
Have to remove HFM module and read RH850 chip to get 28-digit password with APB131 adapter.
Example:
Did 2024 Infiniti QX60 with autel but had to read hfm module to get the password.
OBDSTAR G3:
Obdstar g3 failed with Nissan 40 PIN cable.
You will need to read the HFM module to retrieve 28-digit pin code using OBDSTAR’s C4-06 RH850 adapter.
Nissan Consult III Plus:
If you don’t want to read those RH850 chips. Use Consult3+.
Preconditions:
1. Need Consult 3+ with subscription or use a special patched version of Consult 3+ without subscription
2. VCI like Topdon Rlink X7(it was certified by Nissan), Mongoose GM, VXDIAG VCX SE, Smartlink, Cardaq etc
No need to pull of BCM to connect 40 pin cable.
Example:
Consult 3+ did under 5 mins with no hassle to removing BCM.
Use Topdon Rlink J2534 + Consult 3 plus.
This one way is life saver, 5 mins job, no disassembly, no soldering, no 28 digit pincode. All done via obd.
Connect Rlink J2534 with vehicle via OBD port. Select Rlink VCI.
Select Immobilizer function.
Software will identify vehicle information.
Go to Register key function and follow the software prompts to program key.
