Problem:
Autotuner read Peugeot 508 Delphi DCM7.1A ECU ok, but failed to OBD write.
Solution:
Normal, same with Flex. Just write again and it will be all OK.
Need to write the file again after it fails.
Put key near steering on the left side, before click write ( Hold brake ) and hold it while writing.
Follow instructions exactly.
When message pops up, (switch ignition off waiting 15 sec), turn ignition off and hold brake, after 15sec, turn on ignition and writing will be successful. Then you can release brake padal.
Make sure voltage is over 13V or good charger.
