The VAG ID48 96-bit transponder chip cloning function for Launch X431 IMMO devices is ready now. To use this feature, you have to update Launch X431 key programmer (key tool) software to V1.2.3 and you also need to purchase tokens.
Compatible devices:
Launch X431 IMMO Elite/IMMO Plus , IMMO Pro, IMMO PAD, PRO/PAD tablets and CRP919E/X BT series that are compatible with Launch X431 key programmer
Also requires Launch X431 super chip and tokens.
How to purchase ID48 96bit cloning tokens for Launch X431?
Navigate to Mall- Other Goods.
There are multiple point cards to choose from according to different usage times
- 1 Token (1point card)
- 10 tokens (pint card)
Enter purchase and delivery information and payment method
Confirm the information and name.
Now you can purchase the number of times and use the 48 chip 96bit copy function.
How to clone ID48 96bit transponder with Launch X431?
Model example: 2010 Volkswagen
Operating process ：
1.In key programming menu, select Read Transponder function.
2. Go to ID48 (96bit) online calculation function.
3. Put the original car key into the induction coil to identify key information.
4. After successful identification, start collecting data. Insert the key and bring the Launch X431 key programmer close to the ignition switch. Turn on the ignition switch, then turn ignition off. Repeat this step as shown below:
5.The data collection was successful, and multiple groups of data were collected in a cycle as shown:
6.Collect 8 sets of data above until the equipment enters the next process as shown
7. Upload data and keep the network connection normal.
8. Put the Launch super chip into the induction coil.
9.Data is written successfully and cloning is completed.
