OBDSTAR DC706 update VW ME17/MED17 Odometer correction functions since ECM version V30.48.
Supports mileage correction for VW Audi Bosch MED17.1, MED17.5.25 etc ECUs.
Here we take VW Bosch MED17.5.25 ECU as an example.
Tools need:
OBDSTAR DC706 ecu cloning tool
OBDSTAR P003/P003+ adapter or MP001 programmer
Procedure:
Go to Car->ECM software
Quick search ECU, i.e VW Bosch MED17.5.25
Check instruction and wiring connections
DC706 will read INT eeprom/flash, write INT eeprom/flash, read IMMO data, decrypt IMMO data and correct mileage for this ECU.
MP001 connection
P003+ connection
Check Pinout
You will need to connect a 120ohm resistor.
Follow wiring diagram to connect ECU with P003 and DC706.
Select VW Bosch MED17.5.25, bench mode and P003+
Press Connect
Read Chip ID successfully.
Select VW ME17/MED17 Odometer Recalibration function
OBDSTAR DC706 will read the current mileage (KM).
Enter the mileage you desire. Press OK and confirm the value you entered.
Correct mileage successfully.
Check odometer on dashboard after installing the ECU back to vehicle.