How to Read EDC16 ECUs with CG FC200 & MPC5XXX Adapter?

CG FC200 Programmer released a new mpc5xx adapter for bench edc16 ECUs (EDC16CP31, EDC16CP35, EDC16C2, EDC16C8 etc).  With this adapter you can read and write edc16 in bench mode.

Not all edc16 ECUs are available yet, but it’s a pretty good start. FC200 released frequent software updates. This has a fairly cheap purchase price!

Cg Fc200 Mpc Adapter

 

How to Read EDC16 with CG FC200 on Bench?

Example: BMW 5 series EDC16C35

 

Let’s connect the programmer.

First to the PC on another one on the CG FC200 pro. You should connect first the power supply but this one you can connect first to the OBD or opposite it doesn’t matter.

Cg Fc200 Read Edc16 On Bench 1

After making good connection, let’s search for the ECU

Cg Fc200 Read Edc16 On Bench 2

Check wiring diagram and connect as diagram

Cg Fc200 Read Edc16 On Bench 3

Cg Fc200 Read Edc16 On Bench 4

Network is required if you want o have checksum correction.

This is our connection.  You need internet for verify this authorization.

You can read flash, external eeprom and flash.

Cg Fc200 Read Edc16 On Bench 5

Read and save Pflash

Cg Fc200 Read Edc16 On Bench 6

Cg Fc200 Read Edc16 On Bench 7

Read and save ExtEEPROM

Cg Fc200 Read Edc16 On Bench 8

Read and save ExtFlash

Cg Fc200 Read Edc16 On Bench 9

Cg Fc200 Read Edc16 On Bench 10

let’s make a writing of the data. let’s simulate we will write the external flash.

Cg Fc200 Read Edc16 On Bench 11

you’ll notice the external first F2 megabytes.

If he will write all this data or he will write only the differences between what is inside and what will put it on?

CG FC200 goes so quickly because he doesn’t find the difference between these two readings and our opinion is good because it’s not necessary to write all the Flash.

if it’s not necessary like on this case.

You need it only for let’s say EGR or DPF and it’s not necessary to delete all the entire flash.

OBDII365