Does Foxflash or KT200 Read and Write Mercedes Delphi CRD11?
Yes, Read as dcm3.2 it’s same protocol, BDM.
CRD11 = DCM3.x, it’s same protocol. So you select BDM only. ONLY GENUINE KESS CAN DO IT OBD.
Try BDM, document called MPC55x_MPC56x_DELPHI_DCM3.x_MB.pdf.
Delphi DCM3.x / CRD11 – Mercedes Benz
Kit to use for connection with JTAG flat cable:
– Multifunction cable
– Flat color cable
Connect multifunction cable as follows:
Solder the rainbow flat cable as in the photo:
To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x
Kit to use for connection with BDM adapter:
– Multifunction cable
– Delphi adapter
– Grey flat cable
– Connectors dip/sip
Connect multifunction cable as follows:
Do a link as in photo:
Solder the dip/sip connectors on the pcb
Insert Delphi adapter in REVERSE as in photo:
To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x
