It is very easy to clone ME 2.8 ecu instead of going through renew procedure. It is a cylinder V6 ECU on a Mercedes w203. It runs on E-class it also runs on W163 module model, also the W164 for ML500.
How-to: Cloning ME 2.8, M112 and M113 ECU (c240, e320)with Autel im608 pro
Once you know exact IC is, you can read this particular chip down there instead of you going to pull out this chip.
The easiest way to do this is do a connection with the APB103 clip adapter.
Just have to place down and connect with the xp400 pro.
Follow the whole process below. It is very very easy you just move to your Programmer.
Go to Go to Programmer function->Chip Function-> Chip Read & Write ->EEPROM->ST->ST95XXX-> ST95P08->EEPROM-> Read
search for the ST type of chip that’s the st, then you move down to this to select the xt95
so when you select this then watch it go EEPROM, you can read it now
Read and save EEPROM.
Now moving it over to the new one.
The easiest way to clone with im608 pro is just to click Write.
We need to write this time. Now i go to that exact file i saved and that is it.
keep writing successfully and now we need to verify.
Then reinstall ecu back to vehicle.