How to Fix VVDI2 IMMO4 Keyless Keys not Able to Learn, 1-2 on Dash?

Car model and year:

A 2016 Skoda Yeti with keyless ignition ( IMMO4-kessy)

 

Purpose:

To add an aftermarket key ( xhorse )

 

Key Programmer to use:

Xhorse VVDI2 Key Programmer

 

Symptom:

The key didn’t work somehow, ( was not able to learn, 1-2 on dash)

 

Then I decided to teach only the original key back, proceeded VVDI2 says All keys learned successfully, yet on the dash still 0-1 shows.

 

Look at the images below:

Vvdi2 Immo4 Keyless Keys 01 Vvdi2 Immo4 Keyless Keys 02 Vvdi2 Immo4 Keyless Keys 03

 

 

How to solve this problem?

That happens because you did not finish key learn, and once you go into key learn – cluster show 0-2 for example, all keys are delete from immo – you can see that on the config that there is no key.

 

Xhorse VVDI2 tech support https://www.obdii365.com/.

OBDII365