Yanhua Mini ACDP Bluetooth Solution: Configure ACDP device WIFI failed

This is obdii365 tech support for Yanhua Mini ACDP with the following error message when connected to the mobile:

Configure ACDP device WIFI failed. Please retry

configure-acdp-device-wifi-failed

Yanhua ACDP tech support from obdii365.com:

 

You don’t select the right serial port for your ACDP bluetooth adapter.

configure-acdp-device-wifi-failed-solution-1

Please select a USB serial port

configure-acdp-device-wifi-failed-solution-2

Good to know: ACDP Bluetooth setup instruction

 

Step 1. Bluetooth adapter connection

Step 2. ACDP initial use setup

Step 3: Device ID binding

 

in detail…

 

Step 1. Bluetooth adapter connection

Plug the Bluetooth adapter into the PC USB port ( Make sure the driver is installed) and the PC is connected to WIFI

This is the Bluetooth adapter

acdp-bluetooth-setup-1

source: http://www.obdii365.com/wholesale/yanhua-mini-acdp-bluetooth-adapter.html

 

Step 2. ACDP initial use setup

Run ACDP software on the PC desktop

acdp-bluetooth-setup-2

Go to Mini ACDP setting – initial use settings

acdp-bluetooth-setup-3

acdp-bluetooth-setup-4

Initial use settings (ACDP)

  1. the pc is connected to the wifi and confirm it has access to the internet
  2. acdp hardware access power adapter
  3. press and hold the “SET” button on the acdp device for about 7 seconds until the device buzzer’s

sounds, then release the “SET” button and click on “Next”

acdp-bluetooth-setup-5

Initial use of settings (WIFI configuration)

If the PC is a laptop with WIFI access function, read [note 1]

If the PC is connected through a WIFI router with wired network, read [note 2]:If the PC with WIFI access function, Connect the PC to WIFI.

 

If the PC without WIFI access function, Connect the WIFI adapter with the PC USB, Connect the WIFI

and follow the steps below

  1. select serial port
  2. open
  3. scan
  4. device
  5. wifi name
  6. wifi password
  7. start configuration

acdp-bluetooth-setup-6

 

Yanhua ACDP Bluetooth connection success!

acdp-bluetooth-setup-7

 

[note 2] If the PC without WIFI access function, the PC is connected through a WIFI router with wired network. Follow the steps shown as below.

acdp-bluetooth-setup-8

ACDP WIFI connection success!

acdp-bluetooth-setup-9

 

Step 3: Device ID binding

Go to id binding after wifi connection is done

acdp-bluetooth-setup-10

Select device ID to bind

acdp-bluetooth-setup-11

Confirm the device id and back

acdp-bluetooth-setup-12

Confirm the device is bound and connected successfully

acdp-bluetooth-setup-13

Job’s done!

That’s all about ACDP bluetooth setup.

 

For more details, pls watch the Youtube video

ACDP tech support: http://www.obdii365.com/producttags/yanhua-acdp.html

OBDII365