FLY FVDI J2534 interface is compatible with SAE J2534-1 and partly SAE J2534-2 software, i.e Ford/Mazda IDS, Toyota TIS, Jaguar Land rover SDD, GM GDS2, ELM327 etc. Here’s the step-by-step guide on installing Ford IDS V110 software.
Version: Ford IDS V110.01
Operating system: Windows 7 32-bit (you can test other systems)
Function: supports Ford diagnostic & programming
What’s new: supports Ford J1850 VPW and J1850 PWM(Ford SCP) protocol
How to install FVDI J2534 Ford IDS V110.01?
Step 1: Install setup
Open software CD or download software
Step 2: Install FVDI J2534 driver
Open software folder
Step 3: Launch FVDI J2534 Ford IDS
Delete IDS and VCI Manager to Recycle Bin
Confirm FVDI J2534 interface green LED flashes and PS switch button is pressed down.
PS Push Switch:
Released: works as ELM327 mode
Press: works as J2534 mode )
Now you can use Ford IDS V110 software to diagnose and program
Note: If you have IDSLoader Open VCI device failed error, that means you have not connected your device with your computer; Connect your device with computer,and the FVDI J2534 software will be opened normally.