Better in the hardware:
- The built-in VCI box offers more stable communication.
- The 8″ touch screen offers better vision experience.
- Allow the user to charge by the OBD port of car. Not like the X300 DP 7″ Pad, which need to be 100% charged before use.
- With specialized toolkit, high grade and practical.
- Industrial -grade design, comes with the silicone sleeve
- The back bracket allows the user to hang it on the steering wheel or stand on the table, which brings great convenience to the operator.
- Comes with Toyota Lexus Emulators (The first 4 pieces are already released, and the 5th one is under development)
- The following 3 adapters are integrated into the OBDSTAR P001 programmer: EEPROM /PIC 2-in-1 adapter, RFID adapter (VW Audi 4th / 5th IMMO programming and other cars e.g Porsche, BMW, Fiat etc.) and Renew Key PCF79XX adapter.
- Adds the clip for reading SOP 8PIN EEPROM.
- Adds the cables for reading ECU via OBD (Used to clone ECU and active the switch).
|S/N||Features & Functions||Obdstar X300 DP Plus||Obdstar X300 DP|
|Hardware & Design|
|1||Screen size and industrial design||Better||Good|
|3||Work separately without VCI||√||×|
|4||Charged by OBDII||√||×|
|5||4 Toyota emulators||√||×|
|7||Wiring harness for new functions, such as ECU cloning and switch activation||√||×|
|5||Switch activation function||√||×|
|6||“Help” function – covers built-in support car list,
help notes and wiring diagrams
|7||No need pay for software update for FREE during the valid time (one year)||√||×|
Better in the software:
- ECU Programming/Cloning
ECU cloning means copy ECU, that is the OBDSTAR X300 DP Plus copies the data from the original car ECU, then write it into another same ECU hardware, so that it can achieve the same function as the original ECU.
When you want to change the new ECU or the second ECU, if you use X300 DP Plus to clone via OBD, you won’t need to go to the 4s store to do the online programming or dismantle ECU to weld, read & write.
ECU clone Pros :
No need to go to 4S shop, convenient, fast and save money.
Simplify the operating steps, even the amateur can also operate.
No need to dismantle and weld the ECU to read & write, it is zero risk to clone ECU via OBD with the X300 DP Plus.
- Switch activation function
Nowadays, many car models’ accessory power supply of the dashboard or audio equipment needs to be activated to enter the boot status through the related module CAN.
However, when the car technician maintains the dashboard / audio equipment, the main unit is out of the CANBUS network so it maybe won’t boot. X300 DP plus ” switch activation function” can emulate the CANBUS communication to active the power supply of dashboard / Audio so that it can enter the boot status, then it will test and verify the dashboard and the Audio, also the technician can save money avoiding to purchase many the boot platform and cables of kinds of car models.
- Adds the “Help” function including the testable car models, update notice, special features, help instruction, wiring diagram etc.
Testable car models: The user can read the testable car models and year.
Update notice: The user can read all of the update content.
Features: The user can read all of the special features and the functions that only X300 DP Plus supports.
Help instruction: Built-in the guide and instruction for each car model or function.
OBDSTAR X300 DP PLUS has several configurations:
Immobilizer+Special function(EEPROM+Key Renewing)Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)
Immobilizer+Special function(EEPROM+Key Renewing)+Mileage correction+Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smarkt key Emulator)+others(Ignition coil+Remote tester)
Immobilizer+Mileage correction+Diagnosis+Special function (Oil reset +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag reset+TPMS+Steering angle reset+OBDII+DPF+Injector code+Suspension matching+Gear learning+CVT learning+EEPROM+Key renewing+ECU cloning)Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester).