JMD Handy baby key programmer Cbay hand-held car key copy machine for 4D/46/48 Chips has been updated to the new version 6.1.0.
Handy-baby 6.1.0 update info:
- copy 4D70-dst80 （KIA and Hyundai）
- chip transfer
- more types of chips generated
- more detail information about chips
note：we are sure Ford(80bit) which made in China can be copy, but not sure Ford in all the countries can be copy, so it may decode fail. Locksmiths from Europe success in copying Ford(80bit).
1.Copy transponder:46/4D/4C/13/some of 48 transponders.
2.Write data to transponders:46/48/4D/4D+/8A.
3.Identify transponders: 11/12/13/40/42/44/46/ 47/4C/48/61/62/63/64/65/67/68/6A/6B/70/71/72G/83/8A.
4.Generate 4D transponders:61/62/63/65/67/68/69/6A/6B/71.
5.Generate vice 48 to fixed 48 transponder.
6.Copied fixed transponders:46/4D/4C.
How to update JMD Handy-Baby to version 6.1.0:
Unzip handy baby 6.1.0 update file
Connect handy baby device to PC
Start the device
Found new hardware wizard:
select Install … (Advanced), then Next
Select Include this location in the search, then Browse Desktop/ USB Driver, then OK
Wizard searches CP2102 USB to UART Bridge Controller, then Next
Software for Silicon Labs CP210x USB to UART Bridge installation success, Click Finish
Open Computer management
Select Device Manager->Ports (COM & LPT)-> Silicon Labs CP210x USB to UART Bridge (COM5)
Open handy baby 6.1.0 update tool on Desktop
Select the English language
1- with the palm-sized data cable to the computer
2- do not connect more than one palm-sized
3- the upgrade please be patient
4- the software does not prompt all the update is complete, do not disconnect the cable!
Restart Handy baby key copy machine, then Updating…
All updating successfully!
Now your handy-baby is used with v6.1.0 software.
Technical support “How to update Handy Baby key copy to V6.1.0”