Here is the solution to old MB SD Connect C4 multiplexer cannot work with the new XENTRY/DAS and SDnetControl “no signal” problems.
Background:
2015.12v MB SD C4 DAS Xentry software cannot work with 2013 sd connect c4 diagnostic system.
Operating system:
Windows XP
Error interface:
No signal
Self test results:
Selfdiagnostic
==============
ERROR:?Device?’100925?(2)’?isn’t?in?state?available
Device:?SDconnect/eCOM
Toolkit-Resultcode:?-1
Testresult:?0
Number?of?errors:?1
Number?of?warnings:?0
—>
Go to learn
“How to setup SD C4 software in HDD/ SSD”
Video guide:
Main Steps:
Set date and time same as the current
Step 1 – Run StartKeyCenter
Step 2 – Action to avoid Xentry reactivation
Step 3- Run Get Hardware ID
Step 4 – Run EPC & WIS
Step 5 – Add “license” to registry
Step 6 – Run EPC & WIS with new password
Step 7 – Network setup
Step 8 – Run SDconnect Toolkit
Step 9 – Diagnosis
For details of SD C4 xentry/das, epc, wis activation(setup), pls refer to
http://blog.obdii365.com/2016/03/23/activate-mb-sd-c4-2016-03-das-xentry-on-win8-via-wifi-and-lan/