Benz MB SD Connect Compact C4 2016.03V DAS Xentry Win8 hard drive (HDD) and solid drive (SSD) is available in obdii365.com. Here are video guides to MB Star diagnostic DAS Xentry activation and setup on Win8 via WIFI/without WIFI.
How to activate and set up Benz MB SD Connect C4 2016.03 DAS Xentry EPC on Windows 8 via WIFI wireless connection?
Preparation
Step 1 – Run StartKeyCenter
Step 2 – Action to avoid Xentry reactivation
Step 3- Run Get Hardware ID
Step 4 – Run EPC & WIS
Step 5 – Add “license” to registry
Step 6 – Run EPC & WIS with new password
Step 7 – Network setup
Step 8 – Run SDconnect Toolkit
Step 9 – Diagnosis case on Benz B245
NOTE: Setup Date and Time of the laptop as current date and time
Step 1 – Run StartKeyCenter
Open “StartKeyCenter” on Desktop, to get the SDconnect c4 Hardware ID and App ID
Complete Licence information (Hardware ID, App ID, StartDay, ExpirationDay), then click “Generate” to get License String
Copy License String, then go to “StartKeys”, click “Enter” to read StartKey, then “Save” data
Step 2 – Action to avoid Xentry reactivation
Go to Local Disk C:/ ProgramData/ LicDir, the copy and paste “lic_key_2.dat”, re-name as “lic-key_2.x4711”
Setup Properties of “lic-key_2.x4711”, select Read-only
Then open XENTRY Diagnostics Openshell and close it
(NOTE: this avoids the activation code to be lost and reactivate XENTRY)
Step 3- Run Get Hardware ID
Run the software “Get Hardware ID” , copy the generated hardware ID to a newly-established Notepad name “key”.
Step 4 – Run EPC & WIS
Run “EPC & WIS” on Desktop and Login with user name: admin & password: 12345
Go to “server”-> “edit the access authorization”
Copy current MAC address (LAN ID) to the new Notepad
Save data and close
Step 5 – Add “license” to registry
Add “license” to registry
Then open “key” Notepad, you will see input data, EPCnet & WISnet password
Step 6 – Run EPC & WIS with new password
Back to EPC & WIS interface, and copy the new EPC & WIS password on “key” Notepad
Then save data
Go to “programs”
Go to “EPC” for Benz vehicles repairing information
Exit EPC
Go to “WIS/ASRA”
Accept the risk and Run it
Exit WIS
Close EPC & WIS interface
Step 7 – Network setup
Turn off Wi-Fi connection
Open Network sharing center and go to Network connection->Ethernet Properties->Internet protocol version 4 (TCP/IPv4) Properties
Set IP address:172.29.127.110 and Subnet mask: 255.255.255.0
Step 8 – Run SDconnect Toolkit
Run SDconnect Toolkit and cancel selection of “WLAN parameters.workshop” and “WLAN parameters.road”
And click Start
SDconnect Toolkit Preview, click OK
Close SDconnect Toolkit
Step 9 – Diagnosis case on Benz B245
Run XENTRY Diagnostics Openshell to begin diagnosis and programming.
Here, take Benz B245 as an example
Go to Passenger car and select B(245)
Select model, here: 245.234 -B 200 Sport Tourer Turbo
Select engine and transmission, here: engine- 266.980, transmission- all
Identification is complete
Click the diagnostic icon on the left, and XENTRY turns to DAS interface automatically
Read note of using DAS 2016.03, click F2 to continue
Again, read another note and click F2 to continue
Select Date of manufacturer to read vehicle data, here: up to 11/2005
Select engine and steering, here: engine- gasoline, steering- left-hand steering
Select 245.234 B 200 Turbo
Do Quick Test on 245.234 All control unit
MB 245 test result
Enter driven total distance, and then back to quick test interface again
Select any unit to go on test.
How to activate MB SD C4 2016.03 DAS Xentry without WIFI
How to install Star diagnostic SDConnect C4 2016.03 HDD on VMware workstation? Please check Video column in web page.
http://www.obdii365.com/wholesale/201603-mb-star-c3-c4-500gb-software.html
