Obdii365.com engineers today tested Digiprog 3 v4.94 odometer correction tool on Toyota hilux 93c66. Here displays the test procedure.
Tool used: Digiprog3 v4.94 odometer programmer
Model: Toyota HILUX C66
Procedure of odometer correction with Digiprog 3 master:
Pin out connection:
COMPRUEBE VALOR ESCRITO – 61132KM
Mileage is changed successfully, from 132005KM to 61132KM.
NOTE: Tips for Using Digiprog III:
- Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
- Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
- Always keep your DigiProg 3 in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned
- completely as the solvent can damage the clips.