How to install DS17 Infineon Tricore Boot Reader software

Here is the instruction on DS17 reader software installation. DS17 EDC17 MED17 ECU Infineon Tricore Boot Reader is an updated version of BDM100 ECU programmer, it takes direct access on processor and EPROM memory of the ECU over a dedicated port like the BDM system.


Video guide

Free download software for DS17 Infineon Tricore Boot Reader

Step 1: Install software setup

Open software CD

Open DS17 folder

Open and install “DS17 Bsi-To-Go Setup”

Select software language, English or Deutsch


Click OK

Install Bsi-To-Go Setup wizard


Click Next

Accept license agreement

Click Next

Click Next

Click Next

Click Next to create desktop shortcut

Click Install

Completing the Bsi-To-Go Setup

Tick “Launch Bsi-To-Go” option and press Finish


If the system pops up Bsi-To-Go 1.14.00 windows, cancel it.


Step 2: Install driver

Connect the DS17 Infineon Tricore Boot Reader interface with computer via USB cable

The system starts to found the new hardware wizard

Select “Install from a list of specific location (Advanced)”, click Next


Browse and save file to C:\Program Files\ EVC\BsiToGo\driver


Click Next

The system will display “Cannot Start this Hardware” error, click Finish

Open My Computer->Manager->Device Manager->Universal Serial Bus controller->BSL 100

We will see the BSL100 status is disabled, click BSL100


Reflash the windows until the BSL100 device can be detected


Step 3: Read/Write ECU

Open Bsi-To-Go software on the desktop

Select “Read an ECU”


Click Next

Choose ECU type


Click Next

Back to Bsi-To-Go 1.14.00 menu, select Show this dialog in English

Follow the system prompts to operate



DS17 Infineon Tricore Boot Reader Support list:

EDC17/MED17/ME17/MEV17/MEVD17/PCF2.1/SD13/SD14/SD16/SID208/SID807, please check here