How to install Xhorse Condor XC-MINI cutter & clamp?

Here are the instructions on installing Xhorse iKeycutter Condor XC-MINI key cutting machine’s cutter and clamp.

1. Install cutter
install Xhorse Condor XC-MINI cutter & clamp
To Install the cutter

1)Put the cutter into the cutter hole and to the top limit position, ensure the section of cutter

And clamp lateral parallel

2)Turn the CUTTER LOCK SCREW clock wise, till the cutter is tightened.

2. Remove the cutter
install Xhorse Condor XC-MINI cutter & clamp
To Remove the Cutter

1)Hold the cutter lightly, Turn the CUTTER LOCK SCREW counter clockwise

2)after the cutter loosen, remove it

3. Install Clamp
install Xhorse Condor XC-MINI cutter & clamp
To Install the Clamp

1)Turn the LOCKING WRENCH counter clockwise on the left side to loosen.

2)Choose the clamp according to the key type, Push the clamp from the right side of the CLAMP CARRIAGE to limit position

3)Turn the LOCKING WRENCH clockwise to tighten the clamp.

Clamp samples:
Clamp M1, Clamp M2, Clamp M3
install Xhorse Condor XC-MINI cutter & clamp
Comparison Among Different Key Cutting Machines: http://www.obdii365.com/service/comparison-among-key-cutting-machines.html

OBDII365