BDM100 CMD V12.55 Clone ECU chip tuning kit pinout

BDM100 ECU chip tuning tool with current software version V12.55 is truly a cheap choice for user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor via BDM.

Here are the pinout siemens peugeot 307 sid 803 to read BDM100 clone and some frequently asked/concerned questions of BDM100 ECU programmer.

ⅠPeugeot 307 SID 803 siemens read BDM100 pinout

Here are details:
BDM100 CMD V12.55 Clone ECU chip
See the connection with a tester
BDM100 CMD V12.55 Clone ECU chip
BDM 100 PCB and connection pinout
BDM100 CMD V12.55 Clone ECU chip BDM100 CMD V12.55 Clone ECU chip

ECU connecting cable with 3 adapters
BDM100 CMD V12.55 Clone ECU chip BDM100 CMD V12.55 Clone ECU chip BDM100 CMD V12.55 Clone ECU chip BDM100 CMD V12.55 Clone ECU chip BDM100 CMD V12.55 Clone ECU chip BDM100 CMD V12.55 Clone ECU chip  The last picture is in Spanish, never mind, it still reads.

ⅡFrequently asked questions of BDM100 clone:

Q: How do I supply voltage to my BDM100? I just connect BDM100 to the PC by USB? Is that all? And I supply voltage to the ECU via Connector 2 and Connector 3? Am I right or I can just do it like in any other ECU?
A: Yes, do power supply to ECU via ECU plug and BDM interface will catch power source trough USB port. You have to give a voltage power supply to the control unit, the BDM will not plug the transformer is not necessary.

Customer Review:
I have a clone working at least for 5 years working on bosch siemens anda marelis ecu with no problems, the only advice is to buy a good power supply because the one that comes with BDM its crap that can destroy the ECU.

Q: When connect BDM100 ECU programmer with computer, the indicator did not flash? Did not feed with power supply?
BDM100 CMD V12.55 Clone ECU chip

A: If the computer can detect the BDM100 driver and you can open the software, the device is in good condition. The indicator light only flashes when you are programming the ECU via BDM.

Q: I try to install the BDM100 software, but the computer cannot recognize the driver and failed to continue.
BDM100 CMD V12.55 Clone ECU chip
A: If the driver cannot be detected, the USB or the BDM main unit is broken, you need to talk to your dealer as soon as possible.

Q: Can the BDM100 cmd clone V1255 ecu programming tool work on EDC17 via BDM?
A: The BDM100 can not read EDC17 by BDM even you have all adapters. But it is good EDC16 (you need extra BDM 100 ECD16 OBD No101 Bosch probe).
For EDC17, you need KESS V2 V2.13 with firmware v4.036 or K-Tag KTM100 V2.13 firmware V7.003.

OBDII365