FVDI ABRITES Commander for VAG V24.0 is a Windows-PC based full diagnostic and programming system for Volkswagen groups: VW, Audi, Seat, Skoda etc. Here is the detail instruction on adding key for VW Jetta 2011 with FVDI.
Computer requirement: Windows XP only
Installation:
1) Well install the ABRITES software follow the video guide
https://onedrive.live.com/redir?resid=C0E4BC01F76D39DE!158&authkey=!ADHGBmIXsgVJwY4&ithint=file%2crar
2) Connect the FVDI commander with computer and vehicle
Run software
Select “Special Function option on the bottom of the program
Select “Key learning” option
There are two Key learning Mode available: “Standard Mode” and “Wizard Mode”. Select “Wizard Mode”
NOTE:
The standard mode requires more user interaction when performing the key-learning procedure while the wizard mode tries to perform most of the operation automatically.
Select Vehicle/Immobilizer type: VW Jetta 2011+ “VDO NEC”, press “Next”
The FVDI software will display immobilizer data, check current key count, press “Next” to start to load data.
Check and confirm Immobilizer keys information, click “Add Key” to continue.
Insert new key/transponder into the key programmer followed the system prompt.
Put blank ID48, software will make dealer and program it to immo.
Transponder is written successfully
Keys successfully added. Press Next
Exit the ABRITES Commander for VAG software program
Video: How to install 2015 FVDI ABRITES Commander For VAG VW Audi Seat Skoda Software USB Dongle
