We walk through the all-keys-lost smart key programming procedure for a Honda Activa ID47 motorcycle using CGDI K2 key tool.
Procedure:
Step 1: Calculate Password
Go to More Function- Honda Activa motorcycle password calculation.
CGDI K2 will show you the wiring diagram to the immo box.
Remove the immo box from motorcycle.
Solder renew cable wires to immo box according to the wiring diagram. Need to solder 4 wires to the immo box: VCC, GND, RES, TOOL0.

After connecting the wires, connect renew cable with CGDI K2 main unit.
Click Read Data to calculate the programming password for Honda Activa motorcycle.

Once connected, the tool reads the data. When the read reaches 100% complete, it prompts you to save the file — save it. You also need to save the passwords. Take a picture of the password.
Step 2: Generate remote
Generate Honda ID47 KeylessGo motorcycle remote using CGDI NXP remote.
Step 3: Program remote
Fix the socket and install the immo box unit. After connecting, the process involves the battery: with the pin connected, use the main wire coming directly from the battery. Press and hold for three seconds — the key light will eliminate (turn off). Once it’s off, the password that appears (for example, 07203483) is entered.
Two types of passwords are provided. For each digit in the number being counted, press the button that many times — for example, to enter a “7,” press seven times; then “2,” “4,” “7,” and so on. After each entry, the key light blinks once and then becomes stable. Continue with the next number (for example, 233483), pressing each digit the corresponding number of times; each entry blinks and stabilizes.
If a digit is 0, simply don’t press — just leave it, and the light will blink once and stabilize.
For example, for a “7,” press seven times, and the key light blinks and stabilizes. For a “2,” press twice, and it blinks and stabilizes.
0- Don’t press
7-7 times press
2- 2 times proress
0- Don’t press
3- 3 times press
3- 3 times press
4-4 times press
8-8 times press
3-3 times press.
After completing this process, the key light automatically becomes stable, the process finishes, and the ignition turns on.
Important Notes
The generated key must be in your hand (or very close to the vehicle) during the process. Because it is a smart key, if you place it far away, the process will not take. This is a must — note it carefully.
























