A common question: Does anyone have a solution for how to do programming online for Mercedes cars?
obdii365.com replied:
Online programming:
Original online scn coding and authorization ID account from the original Mercedes is required. C4 clone is not possible because MB banned it worldwide. Don’t waste your time. Go offline programming instead.
Offline programming:
You can do offline programming with SD C4 & DAS offline with database or with Vediamo /DTS Monaco (with calibration files).
How to set up Vediamo or Monaco for SDconnect C4 DOIP ?
I have a successful case to share with you (Credits to @ karakan08).
Recently I have modified my SDconnect C4 DOIP.
With the current config on my StarPC, vediamo is doing his job perfectly over WIFI.
It is detecting the C4 with DOIP – of course I need to connect my LAN cable to the MUX if I really do need to use DOIP.
Vediamo setup:
CBF side:
SMR side:
This is my current in DTS Monaco:
CBF Side:
SMR Side:
Related Operation Guide:
Mercedes Benz DoIP Hu5 Hu6 Hu7 coding / programming with DTS Monaco 8.13.
If you are unfamiliar with Vediamo or Monaco, it’s time to leave the known territory behind and start learning new stuff!
Look at Moe Vediamo + DTS Monaco Engineer System Training Books
It is packaged with 1pc * DTS Monaco Engineering Software Training Book
1pc* Vediamo Engineer System Training Book
Use LAN cable or Wifi for DOIP?
I have only used the LAN cable for DOIP (because it is a requirement), for wifi it is not so stable.
Someone feedbacked “DTS Wifi work only with the new variant of clone (“XC4Plus or sd connect c4 Plus“).
DOIP Setting C4 DTS see images below. Don’t forget press the “ethernet Activation” than.”
This is not true . Sd c4 work by wifi DTS monaco must only transfer Toolkit folder from Xentry to DTS and all work perfect.
Besides, you should have proper ip and proper serial number for doip. Here you for for sdconenct C4 DoIP setting procedure:
Related Operation Guide:
How to Configure MB SD Connect C4 Plus DoIP Wifi Wireless Connection?
Okay, www.obdii365.com offer the remote assistance service if you have any question on programming with Vediamo / Monaco for sdconnect c4 plus.
Have a good day!
