2014 VW POLO on Lonsdor K518ise for remote key programming:
Remote key production and learning KeyDiy system
Reading automatic immo identifying: OK!
Key programming 2 min: OK!
The original key and new key to be programmed
in Lonsdor K518, immobilizer – vw – immo4 – select immo manually – nec 95320 – immobilizer
loading external code…
obtaining immo information…
Lonsdor read out cs, pin, mac and key info
immo data is saved
immo data type: TT/megaton
the key to be added must be a dealer key
if not, please go to “make dealer key” to generate one
pls enter the number and prepare all keys to be added before programming
insert the dealer key to be added into ignition switch
turn and keep ignition on for 2 sec
make sure key replacement interval is within 5 sec when completed
ok to continue
K518ise finished key adding to POLO
The key is programmed and ready for use
Done!
(credits to Slavo Backov)
