BMW F30 NBT KOMBI Coding with ENET E-SYS

This is the instruction on how to perform BMW F30 NBT KOMBI coding with E-sys F-series coding software.

 

Optional device:

BMW ENET  cable (Ethernet to OBD) Interface for BMW F series

or

BMW ICOM A2

 

Step-by-step intruction:

open E-sys interface

click on Connection icon

select TargetSelector: Project=F020_15-7_502, VehicleInfo=F02

check the connection

click Connect

F30-NBT-KOMBI -coding-bu-E-SYS-1

click OK

F30-NBT-KOMBI -coding-bu-E-SYS-2

go to Expert mode->Coding->Read->FA

right click FA to activate an FA

F30-NBT-KOMBI -coding-bu-E-SYS-3

FA is “Active”

then click Read (ECU)

select folder HU_JNBT [63]

click Read Coding Data

F30-NBT-KOMBI -coding-bu-E-SYS-4

click Close

F30-NBT-KOMBI -coding-bu-E-SYS-5

select CAFD_00000DED_001_020_106 to Edit FDTL

F30-NBT-KOMBI -coding-bu-E-SYS-6

search for kombi

go to HOMBI_CIC->Ausgelesen

EDIT item to kombi-low

then go to SETTINGS_INFO_DISPLAY->Ausgelesen

EDIT item to aktiv

save data

F30-NBT-KOMBI -coding-bu-E-SYS-7

go to Coding->CAFD_00000DED_001_020_106

click Code FDL

F30-NBT-KOMBI -coding-bu-E-SYS-8

click Close

F30-NBT-KOMBI -coding-bu-E-SYS-9

CAFD_00000DED_001_020_106 finished. click Close

F30-NBT-KOMBI -coding-bu-E-SYS-10

close Connection

F30-NBT-KOMBI -coding-bu-E-SYS-11

Done! BMW F30 NBT KOMBI coding is complete!

www.obdii365.com

OBDII365