Good news!!! Original Launch X431 Creader VIII (CRP129/Creader 8) comprehensive OBDII Diagnostic Code Reader software is newly updated to V1.01.001.
Software update tool version: V1.01.001.
Multi-language: English, Spanish, German, Italian, Russian, Chinese
Update: online with TF card
Free download CRP129 update tool 1.01.001 here:
How to update Launch X431 Creader VIII CRP129?
Step 2: Download and install “Launch Creader Update Tool “, after installation is complete, run it.
Step 4: click “Update” to enter the registration page. Input Email and Register Code, click “Submit”.
(Note: if you need Register Code, please refer to step 5 to step 8; if you already have Register Code, after submit, skip to step 9.)
Step 5: the register code can be found in the Creader VII+ (CRP123) / Creader VIII. Connect one end of the USB cable to Creader VII+ / Creader VIII, and another end to the computer.
Step 7: Select “Tool Information”, then press button “OK”
Step 8: the register code shown below is the one needed to enter in the step 4. (Back to step 4 to input register code and continue)
Step 9: Insert TF card into TF card reader, then insert the TF card into the computer.
Step 10: restart the “Launch Creader Update Tool “, select the file you need or click “All”, then click “Download” to start the download software.
Step 11: After complete download, take out TF card from TF card reader and insert it into the slot of Creader VII+ / Creader VIII, then supply power for Creader VII+ / Creader VIII by the USB cable (one end of the USB cable connect to Creader VII+ / Creader VIII and another end to the computer) or by the vehicle diagnostic socket (connect the OBDII connector of Creader VII+ / Creader VIII to vehicle diagnostic socket ), after the Creader starts, it popup a window prompting ” System Upgrade- Sure Upgrade?”, select ” OK” to upgrade.
Step 12: Update complete!