OBDSTAR P003+ new ECU bench jumper cable adapter differs slightly from the old P003 ECU jumper. The bench jumper can be used with OBDSTAR DC706, MP001, P003, P003+ Programmers, This is the old jumper and it has only 2x… Continue Reading
OBDSTAR MP001 programmer can be used to replace the P003/P003+ adapter, but MP001 does not come with V3 Bench A cable. You have to purchase Bench jumper cable separately. Without bench cable, MP001 cannot connect with OBDSTAR DC706. If don’t… Continue Reading
OBDSTAR DC706 recent update adds many Bosch MED17 series ECU (MED17.1.10, MED17.1.21, MED17.3.4, MED17.3.5, MED17.7.1, MED17.7.2, MED17.7.3, MED17.7.3.1, MED17.7.5 etc). Here is an example of cloning a Mercedes Benz Bosch MED17.7.2 ECU on bench. Tools used: OBDSTAR DC706 OBDSTAR… Continue Reading
What is the difference between OBDSTAR MP001, P003 and P003+ adapter? Part 1: P003 vs P003+ Both P003 adapters are used with OBDSTAR DC706 to read ECM/ECUs. The P003+ adapter handles up to 4 right inputs, the normal… Continue Reading
OBDSTAR MP001 is a kit specifically for DC706 programmer. What the MP001 does is pretty much what the P003 adapter does. It gives you more range to be able to connect to different PCMs. The standard breakout cable that comes… Continue Reading
Problem: I try to connect BMW EDC16cp35 ECU with OBDSTAR DC706 with P003 adapter but is impossible. Check wiring diagram many times On diagram I have this – Kline on 4 pin. In description pin 8. I try both. no… Continue Reading
OBDSTAR DC706 ecu flasher released an important update in May 2023- Adding GPEC2, GPEC2A, GPEC3 and GPEC4 read and write in boot mode. No more flex, hptuner or dimsport, dc706 can do it yourself, full reading and writing. V30.08… Continue Reading
Volkswagen, Audi, Seat and Skoda series models require obtaining the CS, PIN and MAC values of the current vehicle first before immo programming. Some models need to read Immo data from the engine system, and some models equipped with Continental… Continue Reading
