Ikeycutter Condor XC-MINI Master Series key cutting machine comes with no built-in battery. So what voltage can be fed to the machine? Default Input Voltage: 90V-264VAC Office voltage: 90V-246V AC But when connect Condor XC-MINI to cars for cutting purpose,… Continue Reading
Xhorse Condor XC-MINI key cutting is better than old Condor in the following aspects: 1. Lighter in weight. Net Weight: 18Kg Gross Weight: 22.9Kg 2. Multi-language available, optional to reset language within the machine 3. Feed 80-220V power supply. No… Continue Reading
Here is the instruction on cutting Nissan NSN14 key with original Xhorse Condor XC-MINI automotive key cutting machine. There are 3 ways to make keys with Condor MINI key cutting machine. Here adapts the 3rd way: “Cut by Bitting” with… Continue Reading
Here are the instructions on installing Xhorse iKeycutter Condor XC-MINI key cutting machine’s cutter and clamp. 1. Install cutter To Install the cutter 1）Put the cutter into the cutter hole and to the top limit position, ensure the section of… Continue Reading
Here is the instruction on programming Volvo XC90 new key when all key lost using Xprog-M ECU programming tool and ikeycutter Condor XC-Mini key cutting machine. Main steps: 1. Read Volvo XC90 EEPROM 93C86 via Xprog-M 2. Cut and copy… Continue Reading
