Just wanted to report the recent successful use of the Micropod 2 clone and DRBIII software that many users have recommended. I only used this to reset the TPMS to clear the dash light and recognize four new Schrader 20028… Continue Reading
My Micropod 2 and DRB III Emulator Software works fine to Perform selected ABS functions on my 2005 SRT6. obdii365.com is where a few of us have bought one and it worked. Source: https://www.obdii365.com/ Price: $129 Installation: OS:… Continue Reading
SUBJECT: Replacing or reprogramming the Front Control Module (FCM) OVERVIEW: Erroneous Actuation of Horns, Headlamps, and Parking Lamps while vehicle is parked MODELS: 2001 – 2004 (RG) Chrysler Voyager (International Markets) 2001 – 2004 (RS) Town & Country/Caravan/Voyager SYMPTOM/CONDITION:… Continue Reading
There is a specific DRB manual for Chrysler Crossfire. In this article I share: PCM /skreem programming, programming the sentry key remote entry module, transmitter programming, sentry key verification test etc. PCM/SKREEM programming with DRB III scan tool STANDARD PROCEDURE… Continue Reading
All you need to do is program old fob (RKE) to the replacement CTM using DRB-III after get a CTM replaced. This is confirmed using an official DRB-III emulator and WiTech VCI pod. Programming the RKE (Remote Keyless Entry) transmitter… Continue Reading
This is a how-to’ of American cars PCM flash reprogramming incl. GM, Ford, Chrysler. Topics are discussed here like: PCM Programming is Nothing New Why Reprogram PCM? Who Can Do PCM Reflashes PCM Reflashing Requirements GM Flash Updates Ford Flash… Continue Reading
I have purchased and used this product on 2005 srt6 coupe and 2007 ltd roadster (us versions). It takes some work to get the software set up. But once you do, it works fine. This Micropod 2 Clone works with… Continue Reading
This is about flashing an ECU using Enhanced DRB III Emulator Disclaimer: obdii365.com cannot provide TechTOOLS for you guys. Just share the way with you all Pls search TechTOOLS on Google. Open TechTOOLS Search by VIN or YME Select… Continue Reading
Here are steps to install DRB3 emulator for Chrysler diagnosis and programming. Attach DRB3 emulator download link! DRB3 emulator download link: http://blog.obdii365.com/2018/06/26/drb-iii-emulator-download-free-for-micropod-2-clone/ DRB III Emulator definition: DRB III Emulator is the exact scan tool software application used in… Continue Reading
This is a research result about “OBD 2 Chrysler Factory Scan Tools ” from a fellow professional and what he shared with all on the web. Thanks to Brin who has taken the time to do this. Here are several… Continue Reading
Look here: Procedure in detail will be of interest to those contempating a PCM change After reading this, it is obvious that PCMs can be reprogrammed. I have flash DVD for the DRB III, hopefully I will get it and… Continue Reading
Here’s something good i found when i bled ABS for my 300M. Very useful…. Hope it works for you guys also. Complaints i posted in https://300mclub.org/forums/: I noticed something with my car that I wanted to comment on… Continue Reading
Discussion: DRB3 compatibility with MicroPOD II and VCI Pod. Car: 2004 Chrysler 300M Software: DRB3 Firmware: wiTech MicroPOD 2 and VCI Pod Disclaimer: The document here is for sharing purpose. Check original resource here. It is… Continue Reading
Look here: clone Micropod 2 test reports Software to test with: wiTech and DRB3 software Cars to test: 1997-2018 Chrysler, Dodge, Jeep, Fiat Functions to test: basic diagnostics, key programming, reflash programming, module flashing, ABS bleeding Test reports… Continue Reading
Model: 2006 Jeep Liberty CRD Limited 4X4 Problem: I think one of my original sensors is going bad on my 06 CRD. I get a chime and dash light that goes away after a bit. This has happened 5-6 times.… Continue Reading
