CG FC200 ECU programmer released new software version 1.2.7.0 on April 23rd, 2025.
CG FC200 V1.2.7.0
1. Added ECUs with VIN modification function:
BOSCH TC2xx：
MD1CP001, MG1CS003, MD1CP002, MD1CS006, MG1CP002, MG1CS080, MD1CP004 SPC5777, MD1CP004_ TC298TP,
MD1CS004, MG1CS001, MG1CS002 SPC5777, MG1CS002_ TC298TP, MG1CS111, MD1CP014, MG1CS008_ TC298TP,
MG1CS016, MG1CS017, MG1CS018, MG1CS019, MG1CS032, MG1CS026, MG1CS024, MG1CS201, MD1CS001, MG1CA007
BOSCH TC17xx：
EDC17U01, EDC17U05, ME17.5.20, MED17.1.61, EDC17CP74, ME17.7.8, EDC17CP06, EDC17CP16, DCU17PC42, EDC17CP58,
MED17.6.9, EDC17CP68, EDC17C61, EDC17C47, ME17.8.31, ME17.8.32, EDC17CP05_ TC1797,
EDC17CP05 TC1796, ME17.8.3.3, ME17.8.33, ME17.8.5, M17.8.7
BOSCH MPC 5xx：
MED9.1, ME9.0, EDC16CP31, EDC16CP35, EDC16U31, EDC16C2, EDC16C1, EDC16U31, ME9.1.1, MED9.1.1, MED9.1.2
BOSCH ST10xx：ME7.7.0, ME7.9.9, ME7.1.1, ME7.8.2, ME7.6.4
CONTINENTAL/Siemens：
SIM271KE, SIM271DE, SDI7, SDI6.1, SIMOS8.4x, SID208, SID310, EMS3110, EMS2511, EMS24xx, GPEC3, GPEC2A, GPEC4, GPEC4LM, GPEC2
DENSO：
MB279700-9500, MB279700-9811, MB279700-9801, MB279700-96xx, RF7x, RF8x, 33920-67P0, R2xx, Pxxx, S5xx,
SHxx, 275700_7082, RA6, 4N14, 23740_5Sxxx_Gen2, 23740-5Sxxx_Gen2, 23740-3Nxxx_Gen1, Subaru SH72531, 112800 SH72531
GM：E38, E39, E39A, E78, E80, E83, E98, E84
Hyundai/Kia：SIM2K_240_ECU, SIM2K_241_ECU, SIM2K_240R_ECU
Mitsubishi：E6T6xxxx, E6TAxxxx
DELPHI：DCM3.7AP, DCM3.5
Marelli：8TDW
2. Added ECUs with “three not ready” functions:
Peugeot/Citroen：
MED17.4.2 TC1767, MED17.4.2_ TC1797, MED17.4.4, MEV17.4, MEVD17.4.4, MEV17.4.2 TC1766, MEV17.4.2_ TC1767
Maserati：MED17.3.4, MED17.3.5
Smart：ME7.7.0
BMW：ME17.2.1
3. ME17.8.8 added the function of modifying CALID code
4. Dongfanghong EDC17CV54 added time reset function
5. Jiangling EDC17C55 added mileage correction
6. Added Volkswagen ECU MG1CA811
