OBDSTAR X300 Classic G3 full user report:
Successfully read and written the CEM of VOLVO XC60 2010 with OBDSTAR G3 .
VOLVO DELPHI CEM M30882F+95320.
How to get the pin code?
Get pin from Dflash.
Function List:
Read EXT eeprom 95320, read EXT eeprom decrypted, read int flash M30882F, read config zone.
Write EXT eeprom 95320, Write EXT eeprom decrypted, Write int flash M30882F, Write config zone.
Volvo CEM pinout Renesas m32c m30882f
To clone this ECM, you read data flash, eeprom. copy all such files to donor CEM. The flash is secured with a pincode.
OBDSTAR G3/DC706 will read pin code for this CEM from Dflash.
Load flash data to extra pin code.
3 ways to get pin code
1.Manually enter pin code (if you have pin)
2. Load INT flash data to extra pin code
3. Read pin code with directly (takes long time and it has low success rate. )
NOTE:
If you read flash data by other programmers, i.e xhorse mult prog.
Copy the flash data read by multiprog to /DP/95********** (serial number)/Data/folder. Then choose method 2 to load flash data to extract 10-digit pin code.
Read also:
