Yanhua Mini ACDP Reset BMW FEM BDC Mileage Failed Solution

Problem:

It is a 2015 MW X5 BDC immobilizer system. Tried to change km with Yanhua mini ACDP2. Initial programming succeeded but failed to reset. ACDP gave the error “Reset FEM/BDC mileage failed”.

Image attached:

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 1

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 2

Solution:

First of all, you got the wrong connection of ACDP2 and FEM/BDC interface board.

Check the correct interface connection as following

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 3

Then if reset FEM/BDC mileage failed, you may lose FEM/BDC coding.

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 4

Perform Step 6: Remove EEPROM Data and Step 7: Recover Coding Data to restore coding. Make sure you back up original data before operation.

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 5

Restore the original data.

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 6

If restore coding completed, but still fail to reset mileage (see error image)

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 7

Check the BTLD software version. If the version is 082, you cannot reset mileage by removing the BDC module.

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 8

If it is BDC 082 version, the mileage is reset via OBD. Purchase BMW BDC OBD module 31. Go to BDC OBD (F Chassis) and reset km.

Yanhua ACDP BMW Change BMW X5 BDC Mileage Failed 9

 

 

Read also:

Yanhua Mini ACDP Adds BMW BDC 085 Key via OBD

Yanhua Mini ACDP BMW BDC Error Not Support IMMO Solution

How to Reset BMW FEM/BDC Mileage with Yanhua Mini ACDP?

 

OBDII365