What is the diference between the new LAUNCH X431 PRO3S+ J2534 Smartlink and Launch X431 PRO5 smartlink 2.0?
Check the table comparison below:
Item | Launch X431 Pro3S+ Smartlink | Launch X431 Pro5 Smartlink
|
Processor | 2.0Ghz 4-Core | 2.0GHz 4-core |
RAM | 4G | 4G |
ROM | 64G | 64G |
Battery capacity | 6300mAh/3.8v
|
6300mAh/3/8v |
Android Version | Android 10.0 | Android 10.0 |
Screen Size | 10.1 inch | 10.1 inch |
Screen resolution | 1280 x 800 | 1280×800 |
Wi-Fi | 2.4 & 5 GHz | 2.4 & 5GHz |
Camera | 8MP rear camera | 8MP rear camera |
Communication | Local diagnosis:
WiFi/BT/USB
|
Local Diagnosis: WiFi/BT/USB
SmartLink Remote Diagnosis: WiFi/Ethernet |
VCI | Smartlink HD 2.0 | Smartlink C 2.0 |
Basic Functions
(Read & Clear the codes and data stream) |
Yes | Yes |
Service Functions | 35+ | 50+ |
Full system diagnostic | Yes | Yes |
Active Test | Yes | Yes |
Auto VIN | Yes | Yes |
Scan VIN/License | Yes | Yes |
Remote Desk | Yes | Yes |
Topology mapping | Yes | Yes |
Online Programming | NO | Yes, built-in BMW and Benz online programming |
Online Coding | Yes | Yes, BMW, Benz and VAG online coding |
Online FFS Activation | Yes | Yes |
Online Calibration & Matching | Yes | Yes |
Guided
Function |
Yes | Yes |
Offline
Programming |
Yes | Yes |
Flash Hidden Function | Yes | Yes |
TSGUN TPMS module | Yes, with TSGUN or i-TPMS | Yes, with TSGUN or i-TPMS |
X-prog3 IMMO programmer | Yes, with X-prog3 | Yes, with X-prog3 |
Battery Test | Yes, with BST-360 battery tester | Yes with BST-360 battery tester |
ADAS | Yes | Yes |
Videoscope | Yes with VSP600 | Yes with VSP600 |
Heavy duty module | Yes, the kit has Smartlink HD module, no need to purchase truck module separately | Yes, with HD set |
Diagnostic Protocols: D-PDU/J2534/RP1210 |
Yes | Yes |
Bus Protocols:
DoIP/CAN FD |
Yes | Yes |
FCA AutoAuth | Yes | Yes |
Tesla software | Yes, purchase from Mall | Yes, purchase from Mall |
Update | 2 Years Free Update, $799 per year later (for both car and truck) | 2 Years Free Update, $450 per year later |
In sum:
- Launch X431 Pro3s+ has smartlink HD module, it does both cars and heavy duty trucks. Pro5 smartlink only does cars.
- Launch X431 Pro5 smartlink supports built-in BMW and Benz online programming, Pro3s+ does not.
- New Pro5 and Pro3s+ both have SmartLink VCI. They look the same, but VCI has different configuration. Pro3s+ Smartlink HD VCI, you don’t need to purchase truck module separately. The HD smartlink does not support Super remote diagnosis. The Smartlink C 2.0 comes from Pro5 can do Super remote diagnosis function.
How to Active Launch Smartlink C & Smartlink B Remote Diagnosis?