Autel also has a set of Toyota 8A blade key AKL adapters for repairing lost keys in TOYOTA/LEXUS cars. These adapters unlock the 8A chip without having to remove the immobilizer box.
Compatible with IM608 and IM508.
Must be used with Autel G-Box3 and APB112
CAMRY, YARIS, VIOS, 4Runner, Avalon, Prius C, SEQUOI A, SIENNA, TACOMA, TUNDRA
Here we will show how to connect the Autel 8A blade AKL cable with Gbox2/3.
Example of use in Toyota Camry (each car may have different positions)
Step 1 Turn on the IM508/608,
enter the IMMO program->Toyota->Manual Selection->Camry->2015- -> Blade Key-> Control Unit-> Immobilizer (H 8A/8E) ->( All Keys Lost)
Step 2 Find the fuse box under the glove box. Remove the fuse IGN_No.1 (see the illustration below). Insert the IGN_FUSE in its place.
Step 3: Open the car hood to find the fuse box. Remove fuse number BAT_NO.1 and connect the B+ FUSE wire as shown in the picture.
Step 4: Remove the starter switch cover, pull out the KSW_NO.1 plug, and connect the KSW cable instead (as shown in the picture below).
Step 5 Connect the G-BOX and 8A AKL cable to the IM508/608 as shown in the figure below.
Step 6 The G-Box will automatically update for the first connection. The STATUS light on the G-Box will blink red and turn green after completion.
Step 7 Insert the key (without chip) and turn the key to ON.
Step 8 Press (OK) to read the information (it may take several minutes depending on the car model).
Step 9 Press (OK) to confirm the key type (SLK6) as shown in the image below.
Step 10 Connect APB112 to IM508/608. After connecting, the light will be blue indicating that it is ready to use. Press (OK) to confirm the key type as shown in the picture below.
Step 11 APB112 will be updated the first time you connect.
Step 12 Simulator key generation is complete as shown in the figure below.
Step 13 Turn the key OFF, assemble the B+FUSE plug and IGN Fuse, KSW as before (assemble the car as before).
Step 14: Take the APB112 that was created as a simulator key and touch it to the side of the start switch, then insert the key (without the chip) and turn it ON. (now you can test the start).
Step 15 Press (OK) to connect the car, enter the Add Key menu, turn the key OFF, pull it out and take out the APB112 that was created as a simulator key.
Step 16 Insert the key (insert the H 8A chip), do not twist.
Step 17 Wait 5 to 180 seconds, key learning is successful, the immo light will be off.
Step 18 Test the start.
Real image sample in Toyota Revo
Fuse box under the storage compartment. Remove fuse IGN_No.1 (see illustration below). Insert IGN_FUSE in its place.
Open the car hood to find the fuse box, remove fuse number BAT_NO.1 and connect the B+ FUSE wire as shown in the picture.
Remove the starter switch cover, pull out the KSW_NO.1 plug, and connect the KSW cable instead (as shown in the picture below).
