Topdon Rlink, VXDIAG and Eucleia J2534 passthru device which is better? Check the comparison table below:
| Brand | Diagnostic
Year |
Programming
Year |
Software | Topdon Rlink Lite | VXDIAG VCX SE | Eucleia T6 Pro | Topdon Rlink X7 |
| Driver | Rlink Platform | VX Manager | Eucleia | Rlink Platform | |||
| Porsche | 2002 till now | 2002 till now | PIWIS4 (engineering) | Yes | Yes | ||
| 2002 till now | 2002 till now | PIWIS3 (engineering) | Yes | Yes | Yes | Yes | |
| 2002-2016 | 2002-2016 | PIWIS II | X | Yes | X | X | |
| Benz | 1996-till now | 1996 till now | Xentry DAS | Yes | Yes | Yes | Yes |
| Benz W447 | Xentry 24.6 | Yes | Yes | ||||
| 2010- till now | DTS Monaco | Yes | Yes | Yes | Yes | ||
| 2004-2010 | Vediamo | Yes | Yes | Yes | Yes | ||
| BMW | 1996- till now | 2004- till now | ISTA | Yes | Yes | Yes | Yes |
| Latest models | ISTA 4.48 | Yes | Yes | ||||
| 2004-till now | E-sys INPA WinKFP | Yes | Yes | Yes | Yes | ||
| GM | 2000 till now | 2000-2012 | Tech2win | Yes | Yes | Yes | Yes |
| 2012-till now | GDS2 | Yes | Yes | Yes | Yes | ||
| SPS/DPS | Yes | Yes | Yes | Yes | |||
| VAG | 2001- till now | 2001- till now | ODIS-E | Yes | Yes | Yes | Yes |
| ODIS-S | Yes | Yes | Yes | Yes | |||
| CAN FD/DoIP | Yes | no CAN FD | Yes | Yes | |||
| Ford Mazda | 2005- | 2005- | IDS/FDRS/FJDS | Yes | Yes | Yes | Yes |
| Jaguar Land rover | 2007-2022 | 2007-2016 | SDD | Yes | Yes | Yes | Yes |
| 2017-2022 | Pathfinder | Yes | Yes | Yes | Yes | ||
| Volvo | 2001- 2014 | 2001- 2014 | VIDA | Yes | Yes | Yes | Yes |
| Toyota | 2005- | 2005- | Techstream | Yes | Yes | Yes | Yes |
| Honda | 2005- | 2005– | HDS/i-HDS | Yes | Yes | Yes | Yes |
| Subaru | 2005-2022 | 2005-2016 | SSM3 | Yes | |||
| 2017-2022 | SSM4 | Yes | Yes | Yes | |||
| Nissan | 2005- | 2005 | Nissan Consult 3 plus | Yes | Yes | Yes | |
| Renault | 2005- | 2005- | CLIP | Yes | |||
| PSA Peugeot Citroen | 2006- | 2006- | Yes | ||||
| GM China | 1996- | RDS/SCS | Yes | Yes |
In sum:
Rlink X7 and T6 Pro both support CAN FD and DoIP protocols. VXDIAG VCX SE only DoIP. If you need CAN FD, need to get new VXDIAG CAN FD device. Some license are not ready for the CAN FD device yet.
All these are based on 3rd party drivers. All can be used as J2534 passthru for OEM online programming.
EUCLEIA is not compatible with Subaru, Nissan, PSA, Renault license. Rlink is not compatible with PSA, Renault, SSM3, Pathfinder, PIWIS II software. VXDIAG does supports these software.
Rlink X7 and VXDIAG VCX SE allow adding more software license to the unit.
These are affordable J2534 devices comparing Mongoose Pro adapters. It depends on your need. Some users reported that the VXDIAG VCX FD is faster and easier to set up than Rlink.
