OBDSTAR has launched the new tool – OBDSTAR X300 Classic G3 key programmer.
What is the difference between OBDSTAR X300 Classic G3 (aka Key Master G3) and OBDSTAR X300 DP plus (key master dp plus) key programmer?
Check the table comparison below:
| Function | OBDSTAR X300 DP Plus C
|
OBDSTAR X300 Classic G3 (Key Master G3)
|
| Operation system | Android 5.1.1 | Android 11 |
| OTA | x | √ |
| Screen recording | x | √ |
| Wireless screen casting | x | √ |
| CPU | qual core ARM cortex A9 1.4GHz | Quad-core 64-bit Cortex-A55 2.0GHz |
| Battery | 3700mAh | 9000mAh |
| Storage capacity | 1+32GB | 4+64GB |
| LCD | 8.0 inch | 8.0 inch fully laminated sunlight readable screen |
| Camera | Rear camera 500W pixels | Rear camera 800W pixels, auto-focus |
| Bluetooth | Bluetooth 4.2 | Bluetooth 5.0(Compatible with BT 4.2) |
| External interfaces | x | RJ-45√ |
| x | HDMI√ | |
| TYPE-A | TYPE-A,TYPE-C | |
| WiFi | 2.4G | Dual-band 2.4G/5GHZ |
| VCI | STM32F105 | STM32H723 |
| CANFD Adapter Required | CANFD built in√ | |
| x | DOIP built in√ | |
| x | Low Speed(Fault Tolerant) CAN built in√ | |
| x | RS232, RS485 built in√ | |
| All other common protocol types | All other common protocol types | |
| RFID | P001 Required | Built-in√ |
| Remote Test | RT100 Required | Built-in√ |
| Renault Converter | Renault Converter Required | Built-in√ |
| Weight | About 1kg | 1.5kg (main unit) |
| Dimension | 254mm*174mm*35mm | 270.5mm*165mm*39mm |
| Diagnosis | √ | x |
| OBDⅡ | √ | √ |
| Car IMMO | √ | √ |
| MOTO IMMO | √ | √ |
| HD IMMO | √ | √ |
| Marine IMMO | x | √ |
| E-Car IMMO | x | √ |
| RFID | x | √ |
| Make key | x | √ |
| Unlock Smart key | x | √ |
| Renew key | √ | √ |
| Read/Write EEPROM MCU | √ | √ |
| ECU advanced（Includes ECU unlock） | x | √ |
| Oil/Service reset | √ | √ |
| Other service function | √ | x |
| Remote test | x | √ |
| ECU flasher IMMO（IMMO OFF、ISN、IMMODATA） | x | √ |
| ECU flasher（Clone） | √ Limited supported models, different with DC706 and G3 |
Paid activation |
| Car/Motorcycle cluster recalibration | √ | Paid activation |
| Airbag reset | √ | Paid activation |
| Test Platform | x | Paid activation |
In Sum:
X300 Classic G3 has built-in CAN FD, DoIP, RFID and Renault converters. Don’t need to purchase extra CAN FD, RFID, Renault converters.
The new X300 Classic G3 comes as an immobilizer tool. You can add mileage correction, airbag reset, ECU cloning (DC706 functions) and test platform license to the device. Turn the device into a all-in-one tool.
X300 Classic G3 has a new system, larger storage, bigger battery, BT 5.0 and more advanced hardware configuration.
X300 Classic G3 is mainly targeted at automotive electronics repairers or professional locksmiths, so it does not include the diagnostic and maintenance functions of X300 DP PLUS (except for Manual Service Lamp Reset), but it adds a lot of new special functions.
