Free Download Xentry XDOS for ENET Cable

Free download Xentry XDOS ENET tool.

For XDOS only — allows connection to DoIP only models (W223, W206, W214, EQmodels, etc) with just an ENET cable.

It should work with all versions of XDOS from 09/2021 to current release.

Tested working on 06/22, 09/22, 12/22 and 03/23 xentry xdos.
03/2023 – must have addon 26391 installed.

Before the XENTRY XDOS 2023 version, it is only necessary to replace the file, such as 2022-12, but starting from the 2023-03 version, must have addon 26391* installed.

 

Xentry ENET-XDOS 

XDOS For Xentry

left the LAN adapter on DHCP and its working normally.

ENET cable is advertised for BMW because since a long time BMW is using ENET cables.

This program work only with Xentry and only with OpenShell version.
For DTS Monaco you have to configure Monaco.
And without DoIP you can’t work with new models.

 

*addon-26391 is a Windows program.

The Windows release was developed by Mercedes-Benz. addon-26391 is frequently installed in the C:\Program Files (x86)\Mercedes-Benz directory, however this location may vary a lot depending on the user’s decision when installing the application. AddOnCenter.exe is the addon-26391’s main executable file and it occupies approximately 4.18 MB (4378624 bytes) on disk.

 

 

How to create a DOIP connection with a BMW Enet cable on DTS Monaco?

Bus System Interface: D-PDU API
D-PDU API Version: Softing AG EDIC_D_PDU_API_xx_xx_xxx (any version)
Module Type; MVCI_ISO_13400_DOIP_Collection
Vendor Module Name: —-
Cable: Ethernet_Cable

 Physical links
IEE_802_3: Ethernet 1

Note:
(I) For BMW connection IP Address must be set but for Doing working on Mercedes IP address must be automatic.

Step 1

OBDII365