2023 Xhorse Multi Prog ECU and TCU programmer software download free.
Current software: V184.108.40.206 (2023-12-11)
Database version V4
Operating system: Win7, Win10, Win11
Update: Free update online (press Update Online tab)
How to Install Xhorse Multi Prog Software?
Software is easy to install with a few clicks.
How to Install Xhorse Multi-Prog Device Driver?
Win10 will install driver automatically.
Win7 needs manually install driver.
First of all, connect multi-prog with laptop via USB cable.
Then power on multi prog.
If windows says device driver software was not successfully installed, go to device manager, check device status.
You can see Multi-prog device is not connected (yellow exclamation mark)。
Run multi prog software. Go to Help tag->Install driver
There will be a popup, the device name will be automatically identified here.
If it is blank, it means that the device is not recognized and we need to replug the device or change the port until multi prog device appears here.
Then choose device type as USB Serial (CDC), press Install Driver
The driver was installed successfully.
If device still not connects, run Win7 Repair driver. It should be fine.