CG FC200 Read Chevrolet ME7.9.9 ECU in Boot Mode

This is a Chevrolet S10 2.4 Control unit module ME7.9.9. We can read it with CG FC200 in boot mode.

Cg Fc200 Read Me 7 9 9 On Bench 2

Cg Fc200 Read Me 7 9 9 On Bench 1

In FC200 software, Quick search ECU ME7.9.9 (Bosch ME7.9.9 ST10F275)

Cg Fc200 Read Me 7 9 9 On Bench 3

check wiring diagram

Cg Fc200 Read Me 7 9 9 On Bench 4
in the boot we use two wires with a tip as if it has see normal adapter respecting things

Cg Fc200 Read Me 7 9 9 On Bench 5

Cg Fc200 Read Me 7 9 9 On Bench 6

Cg Fc200 Read Me 7 9 9 On Bench 7

Cg Fc200 Read Me 7 9 9 On Bench 8
Don’t forget to connect almost 14v power supply.

Identity
this mode has no protection, let’s start memory reading.

Cg Fc200 Read Me 7 9 9 On Bench 9
Read and save EEPROM

Cg Fc200 Read Me 7 9 9 On Bench 10

Cg Fc200 Read Me 7 9 9 On Bench 11

It’s already communicating, seeing the protection isn’t exist, he’s about to start reading Flash

Cg Fc200 Read Me 7 9 9 On Bench 12

Start reading Flash
It takes a little longer.

Then save Flash data.

Cg Fc200 Read Me 7 9 9 On Bench 13

Cg Fc200 Read Me 7 9 9 On Bench 14

Cg Fc200 Read Me 7 9 9 On Bench 15

It takes a while but whoever is used to reading a st10 you know how long it takes.

FC200 is much faster reading ST10 flash than other devices.
He finishes reading.

Cg Fc200 Read Me 7 9 9 On Bench 16

OBDII365