We have introduced how to program VW VDO NEC+24C64 all keys lost with Autel IM508/IM608/IM608 Pro service mode via dump previously. Here we have another way to get it done.
Autel IM508/IM608 VW Golf VDO NEC+24C64 All Keys Lost via Dump
Let’s get started.
Example: VW Golf 6 cluster instrument NEC23C64 all keys lost on bench with gbox, put polo to cable.
Select IMMO-> VW-> Expert Selection-> Immo IV Instrument CAN->VDO+ NEC24C64->Enter Service Mode All Keys Lost (G-box)
Immo data will be directly read after performing this operation.
Check wiring diagram in im608. Make a GND needle by yourself.
Connect the GND wire of the g-box.
Operation completed.
Disconnect the ground wire of the G-box from the contact.
Start reading immo data
Read CS, PIN, MAC etc, save immo data.
Then select Make Dealer Key function
Place a black key/chip into the key slot of the programmer and press OK
Generate dealer key successfully
Then perform learn key.
If you make dealer you can go to car to program it via obd.
Never lost abs data doing this way.
