PCTMuner Iveco Bosch EDC17C69 EDC17C49 Bench Pinout

How to connect pcmtuner/pcmflash to Iveco Bosch EDC17C69/EDC17C49 ECUs?

 

There are 2 possibilities for canbus on these ECUs. You must use a capacitor on Iveco edc17c49 even with the original pcmflash and scanmatik (capacitor 10uf must be used for gpt1).

Capacitor 10uf

Always fix is a capacitor in serial with GPT1 10uF or 100uF and extra ground at pin 21.

Bosch Edc17c69 Pinout 1

Bosch EDC17C69 ecu pinout diagram

Bosch Edc17c49 Pinout 1

Bosch EDC17C49 ecu pinout diagram

 

How to read Iveco EDC17C49 with PCMTuner without opening ECU?

Pcmtuner Iveco Edc17c49

Set up pcmtuner usb dongle, hardware and ECU connection following the wiring diagram above

Pcmtuner Iveco Edc17c49 0

In PCMTuner software, select Iveco- Daily- EDC17C49- Bench mode

Pcmtuner Iveco Edc17c49 1

Pcmtuner Iveco Edc17c49 2

Pcmtuner Iveco Edc17c49 4

Check instructions and make bench connection

Then press Read and Write 

Use module [71] Bosch MEDC17 (TC1724/1728/1767/1782/1784/1797) FLASH

Pcmtuner Iveco Edc17c49 5

Pcmtuner Iveco Edc17c49 6

Pcmtuner Iveco Edc17c49 7

Read data until completed

Pcmtuner Iveco Edc17c49 8

Pcmtuner Iveco Edc17c49 9

OBDII365